Kitchen Tiling in Wakefield
Free Consultation
01924-943275
Kitchen Tiling in Wakefield
- Tiling fitted by our own tilers, working alongside our joiners, plumbers and electricians under one project manager - not a separate trade on its own schedule
- 5-year guarantee on tiling labour and installation, 2-year guarantee on tile products
- Free home consultation with a clear written quote before any tools come through the door
What's Included in a Kitchen Tiling Job
- Splashback tiling behind the hob, fitted with adhesive and grout suited to that heat zone rather than a standard wall spec
- Tiling behind the sink and drainer, set out to line up with your worktop and upstand rather than fitted independently of them
- Wall tiling run from worktop to wall units, or floor-to-ceiling where you want a fully tiled wall
- Floor tiling in porcelain, ceramic, slate, limestone, travertine, quarry, granite, marble or mosaic, laid to a non-slip specification suited to a kitchen floor
- Tiling cut in around existing or newly fitted units and appliance housings, so tiles run cleanly to cabinet edges rather than being boxed round afterwards
- Trim and edging at exposed tile edges and at the worktop junction, chosen for how that edge takes daily wear rather than just for looks
- Grout matched to the job - epoxy grout where staining and moisture resistance matter most, sealed cement-based grout where the budget is tighter
- Movement joints built into larger areas of floor tiling so a big kitchen floor isn't laid as one rigid, unbroken sheet of tile and grout
- Tiling worked into full kitchen refits and extension projects as one continuous job rather than a separate appointment
Not Included / Costed Separately
- Removing asbestos-containing floor tiles or backing - that needs specialist licensed removal, which we don't carry out ourselves
- Underfloor heating installation - we'll tile over a system fitted by a heating specialist, but the heating installation itself is a separate trade and separate quote
- Stand-alone re-tiling of bathrooms or other rooms outside a kitchen project - our tiling is delivered as part of kitchen work, not as a general tiling callout
- Making good major hidden damage behind old tiles, such as rotten plaster or a damp stud wall - that's assessed and priced separately once we've stripped back to the substrate
- Tile and material cost, which is quoted separately from labour - your final price depends on the tiles you choose, not just the fitting
How We Take a Kitchen Tiling Job From First Call to Finish
- Free home consultation -- We come out, look at the space, and talk through whether you want a splashback only, tiling from worktop to units, or a fully tiled kitchen wall and floor. This is also where we flag anything that might affect the job, such as an old solid floor that needs levelling first.
- Design and tile selection -- You choose tile size, material and finish - porcelain and ceramic are the two most common choices for kitchens, but slate, limestone, travertine, quarry, granite, marble and mosaic are all options depending on budget and the look you're after. We give you a written quote covering both tiles and labour before anything is booked in.
- Strip-out and substrate check -- Old tiles, units or wallpaper are removed and the wall or floor underneath is checked for damp, movement or damage. Any plastering or floor levelling needed to get a sound, flat surface happens at this stage, not halfway through tiling.
- Wall tiling behind the hob, sink and splashback -- Wall tiles go up first, set out from a level datum line so cuts land in the least visible places - typically behind an appliance or under a wall unit rather than in the middle of a splashback. Tiling around the hob and sink uses adhesive and grout chosen for that heat and moisture zone.
- Floor tiling and movement joints -- Floor tiles are laid to a non-slip specification with movement joints built in around the perimeter and across larger areas, so the floor can expand and contract slightly without the tiles or grout cracking.
- Grouting, sealing, sign-off and waste removal -- Once tiling is grouted and any natural stone is sealed, we walk the finished job through with you. Old tiles, tile offcuts and packaging are removed and disposed of under our registered waste carrier licence, so nothing is left for you to deal with.
What Kitchen Tiling Costs in Wakefield
As a rough guide, kitchen wall tiling - a splashback behind the hob and sink, or a run of tiling from worktop to units - tends to work out around £110 per square metre all-in for a mid-range tile, adhesive and grout. Floor tiling for an average domestic kitchen typically comes in around £800, though that moves a lot depending on floor area and tile choice. Labour on its own generally runs £30 to £60 per square metre, and tile materials themselves range from around £10 up to £200 per square metre depending on whether you're looking at basic ceramic or premium porcelain, natural stone or mosaic. These figures are drawn from Checkatrade and MyBuilder's 2026 UK tiling cost guides, so they're a starting point for budgeting rather than a quote for your kitchen. What actually pushes a price up or down is the state of the wall or floor underneath, how much cutting and setting-out is needed around units and appliances, and whether you're going for a full wall of tiling or a splashback only. A proper quote needs us to see the room, which is why our home consultation and written quote are free and come with no obligation to go ahead.
Granite Compared With Other Worktop Materials We Fit
| Material | Heat resistance | Maintenance | Typical look | Best for |
|---|---|---|---|---|
| Granite | Excellent - natural stone copes well with hot pans, though trivets are still recommended | Needs resealing roughly every 6-12 months; porous surface | Natural veining and flecking, unique to each slab | Traditional and luxury kitchens where a one-of-a-kind stone is the point |
| Quartz | Good, but less heat-tolerant than granite - use trivets | No sealing needed; non-porous resin-bound surface | Consistent pattern, wide colour range | Busy kitchens wanting a uniform, low-maintenance finish |
| Dekton | Excellent - sintered stone copes with direct heat better than granite or quartz | No sealing needed; near-zero porosity, more resistant to UV fading than natural stone | Contemporary, ultra-matte finishes, including large-format slabs with minimal seams | Kitchens with heavy everyday use, or outdoor kitchen extensions |
| Marble | Good heat resistance but stains and etches more easily than granite | Needs regular sealing and careful cleaning around acidic spills | Classic pale, soft veining | Feature islands and period-style kitchens where look matters more than everyday toughness |
| Laminate | Poor - can scorch or blister near direct heat | Wipe-clean, no sealing required | Wide range of printed finishes | Budget-conscious refits or rental properties |
Cabinets We Built Ourselves, Fitted by the Joiners Who Know Their Tolerances
A pull-out mechanism only performs as well as the cabinet it's screwed into, and that's where twenty years of designing, supplying and fitting kitchens across Wakefield and West Yorkshire pays off on what looks, on paper, like a simple job of swapping a fixed shelf for a runner. Plenty of the carcasses we retrofit were built by this same in-house team on an earlier project, so our City & Guilds-qualified joiners aren't measuring blind -- they know where a Victorian terrace kitchen's cabinet run sits a few millimetres out of square, or where a 1970s semi's original units were never quite level to start with, because they cut and fitted kitchens exactly like it before. That's what lets us tell you before anything is ordered whether a Blum LeMans corner unit will actually clear the door swing in
your particular kitchen, or whether a Kesseböhmer magic corner needs clearance a standard carcass won't give it without adjustment. Under-sink storage is a good example of why keeping trades in-house matters on a job like this: fitting a pull-out unit around your existing pipework properly, rather than just around the tap, is plumbing work, and it's carried out by our own plumbers, who hold NVQ Level 2 and City & Guilds qualifications, rather than whoever a storage brand happens to recommend locally. If a larder or drawer run calls for internal lighting, the wiring is run and signed off by a Part P-registered electrician rather than left as bare cable behind the shelving, and every mechanism we fit -- across the Häfele, Blum, Kesseböhmer and Symphony ranges alike -- carries the same 5-year guarantee on the labour and 2-year guarantee on the product, so a stiff runner or a door that stops closing flush six months later gets sorted rather than argued over. We're members of the Construction Industry Training Board and the Federation of Small Businesses, and we hold a registered waste carrier licence for taking the old internals away legally once the new ones are in -- the same standards we hold ourselves to on a full kitchen project apply just as much to a single retrofitted cupboard. It also means the same project manager who oversaw the original kitchen fit, where one applies, is the person you're dealing with on the retrofit, rather than being handed to someone unfamiliar with the job.
The Cabinets Change More Than the Postcode Does
Coverage runs from Wakefield city centre out through Castleford, Featherstone, Normanton, Pontefract, Ossett, Crofton, Walton, Outwood, Stanley, Hemsworth, South Kirkby and Altofts, with our own base just outside Knottingley roughly in the middle of that patch. What actually decides which storage system suits a kitchen has less to do with which of those towns the job happens to be in than with how the cabinets were originally built, and that varies more within a single street than it does between one town and the next -- a corner needing a LeMans mechanism and a straightforward run of standard-width pull-outs regularly turn up two doors apart. That said, a few patterns come up often enough to be worth naming, as a starting expectation rather than a rule. Narrow galley layouts with a deep, awkward blind corner turn up a lot in the older
terraced streets close to Wakefield centre and around Ossett, which is the layout LeMans and magic corner mechanisms exist to solve. Head out toward Featherstone, Hemsworth or South Kirkby and cabinets are more often built to a standard 300-600mm module, which takes a pull-out or drawer-organiser conversion cleanly without any carcass work first. Outwood, Stanley and Altofts skew newer on the whole, with kitchens fitted within the last couple of decades, so the job there is usually a straight swap of an existing shelf for a soft-close mechanism rather than a retrofit that has to work around an older, out-of-square carcass. None of that replaces opening your actual cupboards at the free consultation and measuring what's really there rather than assuming it from the postcode. Storage retrofits get booked in throughout the year rather than clustering into one season, and a job that starts in Ossett in January follows exactly the same design, ordering and fitting process as one that starts in Altofts in August -- there's no lighter-touch version of that process reserved for smaller jobs. Whether it's a single under-sink unit in a Wakefield terrace or a full run of pull-outs across a larger kitchen in Pontefract or Normanton, the same free consultation and written quotation comes first every time, and the same fitters who measure the job are the ones who come back to install it.
Got Questions?
Frequently Asked Questions
Will you take away and dispose of my old worktop?
Yes -- removing and legally disposing of the old worktop is part of a standard replacement job, covered by our registered waste carrier licence. Tell us at the quote stage if you'd rather keep the old worktop or a section of it, and we'll price it either way.
Can I get a price over the phone, or do you need to see the kitchen first?
We can give a rough steer once you've told us the material and roughly how many metres of worktop you need, but an accurate figure needs a site visit -- cutouts, edge profile, access and whether the old surface needs removing all move the price. The visit and the written quotation that follows are free with no obligation to book anything.
How long does a Barnsley worktop replacement take from start to finish?
Once you've agreed the quote, templating usually happens within a week or two, and fabrication -- cutting and polishing granite or quartz, or CNC-routing and heat-forming Corian -- typically takes one to three weeks depending on the material and how busy the workshop is. Fitting the finished worktop, reconnecting the sink and tap, and sealing the joints is normally done in a single day.
Do I need to move out of my kitchen while the worktop's fitted?
No -- you'll want the kitchen cleared of appliances, crockery and anything stored on the worktop before fitting day, and it's sensible to plan on cooking elsewhere for that one day while the old surface comes out and the new one's bonded and sealed, but there's no need to move out of the house.
What does the guarantee actually cover?
Installation and labour are covered by a 5-year guarantee, and the worktop material itself carries a 2-year guarantee. If a joint opens up or a cutout seal fails within that period because of how it was fitted, that's covered; accidental damage from misuse isn't.
Can I have just the worktop replaced, or do I need a full kitchen refit?
A worktop-only job is the normal way we do this, provided your existing cabinets are level, sound and able to take the material you want -- that's exactly what the site survey checks. If the cabinets themselves need replacing, or you want tiling and decorating done at the same time, we'd scope that as part of a wider kitchen project rather than a worktop-only visit.
What happens if my current cabinets aren't strong enough for granite or quartz?
It comes up more often in older kitchens than you'd think, particularly where cabinets were built for a lighter laminate top. We check this at the site survey, and if reinforcement is needed, it's priced as a separate item alongside the worktop quote rather than assumed away -- Corian and laminate are lighter options if reinforcing the carcass isn't something you want to take on.
Can you match an upstand or splashback to my new worktop?
Yes, where the material allows it -- granite, quartz and Corian can all be cut into a matching upstand strip from the same slab or sheet, which reads as one continuous surface rather than worktop plus separate tiling. It's priced as an addition to the worktop rather than included as standard, since it adds cutting and fitting time.
I'm not sure which material's right for my kitchen -- how do you decide?
We start from how the kitchen's actually used rather than the price list -- a family that cooks with hot pans most nights, a kitchen that needs to survive scratches and knocks with minimal upkeep, or a run where you want a seamless integrated drainer without a visible joint all point toward different materials. Because we fabricate granite, quartz and Corian ourselves, the recommendation is based on what suits the kitchen rather than what the workshop's set up to cut that month.
Ready to Replace Your Barnsley Worktop?
Stone and Corian worktops take a few weeks to fabricate once measured, so the earlier your kitchen's booked in for a home visit, the sooner a new granite, quartz or Corian worktop is fitted and sealed. Get in touch for a free, no-obligation quotation with nothing added on once the work starts.
In-House Team • Free Quotes • 5-Year Guarantee
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.