Appliance Shop - Washing Machine & Dryer Shop Wakefield

A washing machine or dishwasher that's given up rarely waits for a convenient moment, and the bigger hold-up is usually finding someone who can supply the right replacement and connect it properly rather than just drop it in the kitchen. We stock and fit washing machines, tumble dryers, dishwashers, ovens, hobs, microwaves and fridge-freezers from Bosch, Samsung, LG, Beko, Hotpoint, Neff, Miele and other major brands, for kitchens across Wakefield and West Yorkshire, and where the appliance is in stock and your day allows it, delivery and installation can usually happen in the same visit rather than a separate measuring trip followed by a second appointment weeks later.

Because appliance fitting is normally one part of a larger kitchen job for us, an integrated dishwasher or oven goes back in with your existing cabinet door refitted and aligned rather than left sitting proud of the units around it, and any gas hob or range cooker gets a full Gas Safe safety check before it's switched on. The sections below cover exactly what's included in a standard fit, what counts as extra work and gets priced separately, and what a straightforward freestanding swap costs compared with an integrated or high-end installation.

• Supply and installation of freestanding and integrated washing machines, tumble dryers, dishwashers, ovens, hobs, microwaves and fridge-freezers from Bosch, Samsung, LG, Beko, Hotpoint, Neff, Miele and other major brands
• Connection to your existing water, waste, gas or electrical supply, including a full safety check on any gas hob or range cooker by a Gas Safe registered engineer
• Fitting your existing cabinet door back onto a new integrated appliance so it sits flush with the rest of the kitchen
• Removal and responsible disposal of the old appliance, with fridges and freezers handled separately because of the refrigerant gas inside them
• A full demonstration of the controls, settings, filters and any WiFi or smart features before we leave
• Same-day delivery and installation where the appliance and your schedule allow it

• Structural work - widening a doorway, reinforcing a floor, or fitting new ventilation for an oversized or commercial appliance - is a separate job, priced once we've seen the space
• Extending or rerouting plumbing, gas or electrical circuits beyond the appliance's existing connection point isn't part of a standard installation and is quoted separately
• Extended warranties beyond the manufacturer's own cover are optional, arranged through our insurance partners, and priced on top rather than included automatically
• Repairing an appliance we didn't originally supply is chargeable per visit - it isn't covered by our installation guarantee

1. Call or request a home visit -- Tell us what's died or what you're replacing. If you already know the model, we can often quote over the phone; otherwise we'll come and measure the space.
2. Space and supply check -- We measure the gap and check the water, waste, gas or electrical connection that's already there, flagging anything - a doorway too narrow for an American-style fridge, wiring that won't take an induction hob - before we give you a price.
3. Delivery and fitting on the same visit -- Wherever possible we deliver and install in one appointment, connect the appliance properly, and refit your existing cabinet door if it's an integrated model.
4. Testing, safety check and demonstration -- We run the appliance through a cycle, check for leaks or - on gas jobs - carry out the Gas Safe commissioning check, then show you how the settings, filters and any app controls work.
5. Old appliance taken away -- We remove the appliance you're replacing for proper disposal, with fridges and freezers handled separately due to the refrigerant gas they contain.

What you pay depends on the appliance and the connection work it needs, not just the box itself. A straightforward freestanding washing machine swap costs far less to fit than an integrated dishwasher that needs a cabinet door refitted and realigned, or a gas range cooker that needs a full safety commissioning check before it's switched on. At the premium end, a specification like a steam oven can run into thousands of pounds before fitting is even counted, which is why high-value appliances get handled with the same care as a precision instrument rather than unpacked and pushed into a gap. Removal and disposal of your old appliance is included in the installation price; an extended warranty on top of the manufacturer's own cover is optional and priced separately through our insurance partners, so you're not paying for cover you don't need. Because the fitting cost moves with the connection work involved, a firm figure needs a look at your kitchen - either a home visit or clear photos and measurements - rather than a price quoted blind over the phone.

When a fridge-freezer stops holding its temperature or an oven cuts out the night before you need it, what usually matters more than the brand on the door is whether a replacement is actually sitting on a shelf rather than six weeks out on back-order. We hold trade accounts with Bosch, Samsung, LG, Beko, Hotpoint, Neff and Miele, and stock position moves with the appliance category as much as the brand. Freestanding washing machines, tumble dryers and standard fridge-freezers in the mid-range of any of those lines tend to be the fastest to source, which is why a straight swap for a machine that's packed in is usually the job we can turn around on the same visit you call. Integrated dishwashers, built-in ovens and combination microwaves take a little longer to line up because the model has to match your existing cabinet opening as well as be in stock, and a hob needs the right control type - gas, induction or ceramic - matched to your worktop cutout before we order it. At the top end, a steam oven, a range cooker or a larger American-style fridge-freezer is often built closer to order than pulled from a warehouse shelf, so those jobs get booked once a firm delivery date is confirmed rather than promised for a date that then slips. We'll tell you plainly on the phone which category your appliance falls into and what that means for timing, rather than quoting same-day for everything and letting some of those jobs run late.

Getting the appliance to site quickly only matters if the connection behind it is done to the same standard every time, so speed isn't allowed to come at the expense of the checks that make an appliance safe to use. Plumbing connections for sinks, taps, washing machines, dishwashers and any appliance that needs a water or waste line are carried out by plumbers holding NVQ Level 2 and City & Guilds qualifications, so a washing machine hose or dishwasher waste connection is fitted by someone trained to the same standard as the rest of a kitchen installation, not bolted on as an afterthought. Electrical work - the dedicated circuit an oven or induction hob often needs, or simply confirming an existing socket can safely take the load of a new appliance - is installed and safety-certified by Part P-registered electricians, which matters because appliance wiring falls under the same building regulations as any other electrical work in a kitchen. Any gas hob or range cooker is installed and commissioned by a Gas Safe registered engineer before it's switched on, which is a legal requirement rather than an optional extra, and that check is built into the same visit as the fit rather than left for you to arrange separately with somebody else afterwards.

Old appliances leave the property under our own registered waste carrier licence, so nothing gets left on the drive or in the garage for you to deal with afterwards, and fridges and freezers are always handled separately from the rest of the load because of the refrigerant gas inside them, which needs to be recovered properly rather than just skipped to landfill along with everything else. Where a new appliance is going into an existing integrated run - a dishwasher or oven behind a cabinet door that already matches the rest of your kitchen - that door comes back off and goes back on aligned to the new unit, so it sits flush with the cabinets either side of it instead of standing slightly proud or catching on the handle next to it. Every appliance we fit, whichever of the brands we hold accounts with, carries a 5-year guarantee on the installation itself and a 2-year guarantee on the product, on top of whatever cover the manufacturer already builds into the appliance, so a leak at a hose connection or a fault traced back to how something was wired six months after the visit gets sorted without a debate about whose responsibility it is.

A good share of our appliance callouts come from kitchens we fitted ourselves, sometimes years earlier, and where that's the case the same project manager who ran the original job is the person coordinating the appliance visit too, so you're not re-explaining the layout of your own kitchen to somebody who has never set foot in the house before. That continuity sits inside a company that has been designing, supplying and fitting bespoke kitchens across Wakefield and West Yorkshire for more than 20 years, with joinery and cabinetmaking carried out by City & Guilds-qualified craftsmen and every other trade - plumbing, electrics, gas work - held to the same qualification standard rather than farmed out to whoever happens to be free that week. We're members of the Construction Industry Training Board and the Federation of Small Businesses, and every job - appliance callout or full kitchen refit - starts with a free, no-obligation consultation and a written quotation before any tools come through the door, so the figure you're given for fitting an appliance is the figure you pay, not a starting point for extras that appear once the job is already underway.

The demonstration at the end of a fit isn't a quick point-and-leave, either. A washing machine or dishwasher gets shown with its filter locations and any auto-dose or eco settings worth knowing about, an oven gets walked through its cooking modes and any self-clean cycle, a hob gets shown its lock and boost functions, and anything with WiFi gets paired to your home network there and then rather than left for you to work out later from a manual. An extended warranty on top of the manufacturer's own cover is available through our insurance partners if you want the extra peace of mind, but it's priced and offered separately rather than bundled into the installation cost by default, so you're only paying for it if you actually want it. The flip side of that is straightforward too: if an appliance we didn't originally supply needs a repair, that's a chargeable visit rather than something covered under our installation guarantee, because the guarantee covers work we carried out, not equipment or fitting from somewhere else - a distinction worth explaining upfront rather than leaving you to find out later.

None of that changes depending on which brand is going in or which town the job's in. A Bosch dishwasher going into a kitchen in Wakefield gets the same Gas Safe, Part P and NVQ-qualified attention as a Miele range cooker going into a farmhouse kitchen out past Pontefract, because the qualifications sit with the person doing the work rather than varying by postcode or price point. If you're not sure which category your appliance falls into, or whether same-day fitting is realistic for what needs replacing, a phone call is usually enough for us to say plainly rather than have you wait in for a visit that turns out to be a measuring trip only.

That same principle carries over when more than one appliance goes in at once. If a fridge-freezer, dishwasher and oven are all being replaced together as part of a wider kitchen update, the same trade accounts that get a single washing machine fitted on short notice also let a full run of new appliances be ordered together and installed to one schedule, rather than trickling in one at a time and holding up the rest of the work while everyone waits on the last delivery. And because the quotation is written and given to you before any tools come through the door, whether that's for one appliance or five, the figure at the end of the job matches the figure you agreed to at the start, not something adjusted upward once the old units are already out. Whichever of those brands ends up in your kitchen, the same underlying approach applies: work carried out by qualified trades, priced honestly before it starts, and backed by a written guarantee once it's finished, rather than a same-day promise that only holds up if nothing about the job turns out to be more involved than expected.

A same-day slot depends on geography as much as stock, and the whole of our regular patch sits close enough to the Woodville Way base in Knottingley that same-day fitting is a realistic offer rather than a stretch goal across most of the area - Wakefield itself, plus Castleford, Featherstone, Normanton, Pontefract, Ossett, Crofton, Walton, Outwood, Stanley, Hemsworth, South Kirkby and Altofts. None of those towns is more than a short drive from base, which is part of why a straightforward freestanding swap booked in the morning can often still be fitted and demonstrated before the end of the same day, rather than the appliance sitting in the van overnight waiting on a second visit to finish the job.

What actually slows a fitter down on the day has less to do with which of these towns the job's in than with three separate things: how the appliance gets through the door, how old the pipework and wiring behind the wall are, and how much floor space there is once it's inside. Getting a wide range cooker or an American-style fridge-freezer down the hallway is usually the first hurdle in the older streets close to Wakefield city centre and around Sandal, where Victorian and Edwardian terraces were built with doorways and passages sized for a kitchen much smaller than most people fit today, and it's quicker to talk the route through on the phone than to discover a doorway's too narrow once the appliance is already off the van. Pipework tells a different story in Featherstone, Hemsworth and South Kirkby, where a lot of the housing dates back to the pit-village building programmes of the 1960s and '70s: those semis were put up to a fairly standard layout, so a washing machine or dishwasher usually goes straight back onto the waste run it came off rather than needing anything adjusted first, and it's one of the more predictable jobs on the schedule for exactly that reason. Floor space is what tends to decide the job out toward Ossett, Crofton and the villages around Pontefract, where a fair number of detached and semi-detached houses have a separate utility room rather than everything crammed into the kitchen itself - handy for fitting a tumble dryer or a second fridge-freezer without it dominating the room, though it can mean a longer cable or hose run between the appliance and the existing supply point than a smaller kitchen would need. Knottingley and Castleford don't sort neatly into any one of those three categories, since both have older terraced streets close to the centre sitting right alongside estates built within the last twenty or thirty years, so which constraint actually applies on the day comes down to the specific street rather than the town as a whole. Outwood, Stanley, Altofts, Normanton and Walton lean toward the newer end of that range, and there the practical question usually isn't the wiring itself, which rarely causes trouble - it's WiFi reach for a smart oven or washing machine, since a router positioned at the front of an open-plan house doesn't always carry a clean signal to an appliance built into a run of units at the back, which is worth checking during the demonstration rather than assumed to just work.

Yorkshire winters keep tumble dryers working harder and for longer than they would in a milder climate, so venting and condensation are checked on every dryer fit across the whole area, not only in the older housing stock where it's most likely to cause a problem. Not every property on our patch is on mains gas, particularly some of the more rural spots around the edges of Crofton, Walton and the villages beyond Pontefract, so a gas hob or range cooker isn't always the automatic choice out there, and an induction or electric alternative gets flagged where mains gas isn't an option rather than assumed as the plan and only discovered on the day of the fit. Wherever the address is on that list, the appliance goes in, gets tested, gets demonstrated and gets Gas Safe commissioned where it's a gas appliance, to the same standard regardless of which town it's fitted in.

Access on the day matters as much as distance from base. Flats and properties above shops in town centres - a few streets in Wakefield, Castleford and Pontefract have this mix - sometimes mean carrying a fridge-freezer or washing machine up a narrow staircase rather than through a ground-floor door, and that's exactly the kind of detail worth mentioning on the phone before the day of the fit so the right number of hands turn up rather than being worked out on the doorstep. Terraced streets in the older parts of Wakefield, Knottingley and Ossett can also mean limited parking directly outside, which affects how close the van gets and how far an appliance has to be carried by hand. None of that changes the price of the appliance or the standard of the connection work, but it's the kind of local detail that comes from having fitted kitchens and appliances across these streets for more than 20 years rather than working from a satnav and a stock list alone.

Scheduling also varies a little by area. Villages and outlying addresses beyond Pontefract and around Crofton and Walton sometimes sit further from the main road network, so a same-day slot booked late in the afternoon is more likely to be realistic for Wakefield, Castleford or Normanton than for the furthest-out addresses, simply because of drive time between jobs. That's not a reason to rule same-day fitting out for the outer edges of the coverage area - it just means booking earlier in the day gives the best chance of it, and that's the kind of practical detail worth flagging on the phone rather than letting you assume and find the slot isn't available after all.

The same holds wherever the address sits on that list. A same-day dishwasher swap in a Wakefield terrace gets the same Gas Safe check on a gas connection, if there is one, as a range cooker installation in a detached property out near Ossett or Crofton, and the same registered waste carrier licence covers the old appliance leaving either address. Distance from Knottingley changes how early in the day a slot needs to be booked, not the standard the work is carried out to once the fitter is on site, and that consistency - the same qualified trades, the same guarantee, the same honesty about what's actually in stock - is what the coverage area really describes, rather than a simple radius drawn on a map. That's as true for a single dishwasher swap booked on a Tuesday morning as it is for a full run of new appliances fitted alongside a kitchen refit, wherever on the list the address happens to fall.

Quick Free Estimate - No Obligation

Fully Insured • Response within 15 mins

🔒 Your details are safe with us. No spam, ever.