Custom Kitchen Storage Solutions

If you're used to digging past a stack of baking trays to find the pan you actually need, or a corner cupboard that swallows anything you put in it, the kitchen probably isn't short on cupboards -- it's short on cupboards that work for what you actually keep. A row of small appliances lined up along the worktop because there's nowhere else to put them, a food cupboard that's really just a shelf with everything stacked three deep, drawers so deep the back half never sees daylight -- these are the everyday storage problems a kitchen fitted years ago was never designed to solve.

We design and build storage around what's actually going into it -- corner carousels, pull-out larders, drawer systems sized to your pans rather than a catalogue width -- and our own City & Guilds-qualified joiners cut and fit every piece, from the first measuring visit through to the finished cabinetry. Every project starts with a free home consultation and a written quotation, and we cover Wakefield and the surrounding towns and villages, from Castleford and Pontefract to Ossett and Stanley.

Most of the kitchens we're asked to look at for storage were fitted with a different set of habits in mind than the household has now. A kitchen put in twenty years ago is often being asked to hold an air fryer, a slow cooker, a coffee machine, school lunch boxes and a recycling system that nobody was planning for when the units went in, and the cupboards weren't drawn up with any of that in the design. Rather than adding a freestanding unit that eats floor space or a shelf that clutters the worktop further, we look first at what's already there -- unused corners, drawers that could be re-fronted and re-fitted, a run of wall cupboards nobody can reach the top shelf of -- and work out how much of the problem can be solved inside the existing footprint before anything gets extended, knocked through or replaced wholesale.

We've been designing, supplying and fitting kitchens across Wakefield and West Yorkshire for more than 20 years, and the storage side of a job is handled by the same in-house team that carries out a full kitchen refit -- designers, joiners, plumbers, electricians, tilers, plasterers and decorators, all working under one project manager rather than a chain of separate subcontractors who've never worked together before. That matters more for storage work than it might first appear: a pull-out larder that needs an extra socket wiring in, or a carousel unit that means moving a stopcock a few inches, is straightforward to sort when the electrician and the plumber are already part of the same team and the same job, rather than being called in separately once the joinery is already finished and fitted.

A storage project doesn't need to be a full kitchen refit to get the same level of attention. Whether it's one corner cabinet that's never worked properly since the day it was fitted, a run of drawers that need replacing, or a whole wall of units being reorganised around how you actually cook, the process starts the same way -- a home visit, a design worked out around your belongings, and a written quotation before any tools come through the door. Smaller jobs aren't treated as an afterthought squeezed between bigger refits; the same designer, the same joiners and the same guarantee apply whether it's a single carousel unit or an entire kitchen's worth of cabinetry.

1. Free home consultation -- A designer visits your kitchen to see what you're storing, how you use the space day to day, and where the current layout is letting you down -- corner cabinets nobody can reach, a pantry that's really just a cupboard, worktop clutter from appliances with no home. This visit is free and comes with no obligation to book anything -- it's the same starting point we use for a full kitchen refit, just focused on the storage side of the room.
2. Design and written quotation -- We put together a 3D layout of the proposed cabinetry, drawer systems and hardware, specify the materials, and give you a fixed written quotation. Nothing is booked in and no tools come through the door until you've agreed the design and the price. The quotation sets out the materials, the hardware and the labour separately, so you can see what each part of the job is costing rather than being given a single lump sum with no breakdown.
3. Fabrication -- Our City & Guilds-qualified joiners build the cabinetry and internal fittings to the agreed sizes, working around awkward corners, sloped ceilings or narrow galley layouts that off-the-shelf units can't handle. Building off-site rather than cutting on the day means less dust and disruption in your kitchen while the cabinetry is being made, and it lets our joiners work to the same tolerances they'd use on a full bespoke kitchen build.
4. Installation -- Our own fitting team installs the new storage, removing and legally disposing of the old units under our registered waste carrier licence. If the job needs extra wiring or plumbing, our Part P electricians or NVQ-qualified plumbers carry that out too, coordinated by the same project manager throughout. Old units and offcuts are removed as part of the same visit rather than left for you to deal with separately, and every drawer, hinge and carousel mechanism is tested before the fitting team leaves.
5. Sign-off and guarantee -- We walk through the finished storage together, check every soft-close drawer and pull-out mechanism operates properly, and hand over the paperwork for your 5-year installation guarantee and 2-year product guarantee. You get written confirmation of what's covered under each guarantee, so there's a clear record of what to call us about if anything needs attention later.

Cost depends mostly on what's being built and out of what. A single corner carousel or a run of soft-close drawer boxes costs less than converting a cupboard into a full pull-out larder, or adding a walk-in pantry that needs extra joinery and possibly new electrics for internal lighting. Materials and hardware make a difference too -- solid timber cabinetry and heavy-duty, full-extension runners cost more than laminate carcasses with basic hinges, but they're what carries the weight of a loaded larder or a stack of cast iron pans without sagging over time. If the job needs plumbing moved, a wall taken out, or electrics adding inside a unit, that's priced as its own piece of work rather than folded into a flat storage rate. Because every kitchen and every list of what needs storing is different, we don't quote a fixed price without seeing the space -- the free home consultation is where we look at what you're storing, take measurements, and put together a written quotation before anything is booked in.

Hardware is usually the biggest single variable inside a storage job once the carcass size is settled. A basic hinge and a light-duty runner cost less to buy and fit than a soft-close, full-extension runner rated for a loaded larder, but the cheaper option is also the one most likely to sag or stick within a few years of daily use, particularly on a drawer carrying pans or tins rather than something light like tea towels. We fit the heavier-duty hardware as standard rather than offering it as an upgrade, and that's reflected in the quotation rather than added on afterwards as an extra.

The written quotation you get after the home consultation breaks the job down into materials, hardware and labour, so you can see what each part is costing rather than being handed one total figure with no explanation behind it. If you want to compare options -- laminate carcasses against solid timber, for example, or a smaller carousel unit against a full pull-out larder -- we can put together more than one version of the quote at the same visit, so the decision about what to spend is made with the figures in front of you rather than guessed at.

None of this changes the basic starting point: the free home consultation is where we look at what you're storing, take measurements and put together the written quotation, and nothing is booked in until you've agreed both the design and the figure. There's no charge for the visit and no obligation to go ahead once you've seen the quote, which is the same approach we use for a full kitchen refit as much as a single storage upgrade.

Timing plays a part too. A single corner carousel or a short run of drawer boxes can often be scheduled sooner than a full pantry conversion, simply because there's less for our joiners to build off-site before the fitting team can go in. If a job also needs a plumber to move a pipe or an electrician to add a socket, those trades are booked in as part of the same project rather than as a separate call-out arranged after the joinery work is already under way, which keeps the overall job shorter than it would be with each trade organised on its own.

The soft-close, full-extension runners we fit as standard aren't the light-duty type that free-runs empty but sags once it's loaded -- they're specified to carry the weight of a full pull-out larder or a stack of cast iron cookware without the drawer front dropping over time, and the heavy-duty hinges are sized the same way for tall pull-out units, not just a standard base cabinet door. Because the cabinetry is built by our own joiners rather than picked from a range, a corner carousel unit, a pull-out larder or a walk-in pantry conversion is sized to the exact opening in your kitchen rather than fitted with packer strips to hide a gap where a standard width doesn't quite fit. That's what the storage audit and 3D layout at the start of the job are for -- what gets built matches what you actually store and where it needs to go, not a standard width taken from a catalogue.

That same standard applies across the rest of the job, not just the drawer runners. We're members of the Construction Industry Training Board (CITB) and the Federation of Small Businesses (FSB), and every trade that might touch a storage job -- joinery, plumbing, electrics, gas work where a hob or range cooker is involved -- is carried out by someone holding the relevant qualification for that trade, rather than a generalist doing a bit of everything. Plumbing work on sinks, taps or appliances is carried out by plumbers holding NVQ Level 2 and City & Guilds qualifications; any electrical work, from a socket inside a pull-out larder to ambient lighting under a wall cupboard, is installed and safety-certified by a Part P-registered electrician; and if a storage upgrade is combined with a new gas hob, that's commissioned by a Gas Safe registered engineer. We've been doing this across Wakefield and West Yorkshire for more than 20 years, and the same in-house team structure that applies to a full kitchen refit applies just as much to a single run of drawers or one corner carousel.

None of that is subcontracted out to keep costs down on a smaller storage job either -- the same qualified tradespeople who'd work on a full kitchen refit are the ones who turn up for a single corner carousel or a run of drawers, because it's the same in-house team either way rather than a different crew scaled to the size of the job.

The registered waste carrier licence we hold covers the removal side of the same job -- old cabinetry, worktop offcuts and packaging leave the property with us and are disposed of through the proper channels rather than left for you to arrange a skip for, or worse, fly-tipped by whoever's cheapest. It's a small detail next to the cabinetry itself, but it's part of the same standard: every part of the job, from the qualification of the person wiring a socket to the paperwork behind removing your old units, is handled the way we'd want it done in our own kitchen.

We're based on Woodville Way in Knottingley and design and fit custom storage for kitchens across Wakefield and the surrounding towns and villages, including Castleford, Featherstone, Normanton, Pontefract, Ossett, Crofton, Walton, Outwood, Stanley, Hemsworth, South Kirkby and Altofts. The right storage approach depends a lot on the property: much of the older housing stock in and around Wakefield is Victorian terraces with narrow galley kitchens, where vertical storage, pull-out larders and door-mounted racks do more work than floor units ever could. Newer estate homes in areas like Outwood and Stanley tend to have larger, more open-plan kitchens, which is where a walk-in pantry or a dedicated baking and entertaining zone becomes a realistic option rather than a squeeze.

Castleford and Pontefract both have a good deal of Victorian and Edwardian terraced housing with narrow galley kitchens, where the storage problem is usually about depth and reach rather than a shortage of cupboards altogether -- vertical space and pull-out larders tend to do more for these layouts than another floor unit would. Featherstone, South Kirkby and Hemsworth grew up around the coal industry and share a lot of that same terraced housing stock, often with a small kitchen extension added at some point that's created an awkward step or a run of units that don't quite match. Normanton and Ossett mix older stone-built terraces in the town centres with newer housing on the outskirts, so the right storage answer really does depend on which part of the town the kitchen is in.

Crofton, Walton, Outwood, Stanley and Altofts have more of the newer estate housing built over the last few decades, generally with a more open kitchen-diner layout and a bit more floor space to work with, which is where a walk-in pantry conversion or a dedicated baking and appliance zone becomes a realistic option instead of a compromise. Wherever the kitchen sits and whichever of these towns it's in, the same home consultation and written quotation process applies, and the same in-house team -- not a locally subcontracted fitter -- carries out the design and the build.

Within Wakefield itself, kitchens range from Victorian terraces close to the city centre through to 20th-century semis and newer housing on the outskirts, which is part of why we don't work from a fixed storage package -- what solves a space problem in a two-up two-down terrace kitchen isn't usually the same answer that suits a 1990s semi with a bigger floor plan. The home consultation is where that gets worked out against your own kitchen rather than assumed from the postcode.

Every custom storage build starts with a free home consultation, where we look at what you're actually storing and put together a written quotation before anything is booked in or any tools come through the door. Because each piece is built to measure by our own joiners rather than picked off a shelf, booking the consultation early means an earlier build slot -- get in touch to arrange a visit. That same team has been designing, supplying and fitting kitchens across Wakefield and West Yorkshire for more than 20 years, so the person who measures up your kitchen is working alongside the same joiners, electricians and plumbers who'll actually build and fit the storage -- not handing the job on to a different company once the design is agreed.

Kitchen Fitters Wakefield | Luxury Fitted Kitchens
Call 01924-943275

Quick Free Estimate - No Obligation

Fully Insured • Response within 15 mins

🔒 Your details are safe with us. No spam, ever.